• • L. El-Gabry, and M. Jaskolski, 2021, “Implementation of Sustainable Integrated Aquaculture, Aquaponic, and Hydroponic Systems for Egypt’s Western Desert Through Global Community Engaged Research,” 2021 ASEE Annual Conference, virtual.

• • L. El-Gabry, 2021, “Development, Implementation and Assessment of Thermodynamics Lab Kits for Remote Lab Instruction,” 2021 ASEE Annual Conference, virtual.

• • M. Alshehaby and L. El-Gabry, 2019, “Irregular Shape Optimization for the Film Cooling Nozzle of a Gas Turbine using Numerical Optimization Tool,” 2019 ASME International Mechanical Engineering Congress & Expo IMECE, Salt Lake City, 2019-10974.

• • L. El-Gabry, M. Jaskolski, 2019, “Offering Engineering Students Global Perspective Through Experiential Learning Project in Wind Energy and Sustainability,” 2019 ASME Turbo Expo, Phoenix, GT2019-92060.

• • L. El-Gabry, H. Xu, K. Liu, J. Chang, M. Fox, 2018, “Effect of Coolant Injection Angle on Nozzle Endwall Film Cooling: Experimental and Numerical Analysis in Linear Cascade,” 2018 ASME Turbo Expo, Oslo, GT2018-75877.

• • K. Ragab and L. El-Gabry, 2017, “Heat Transfer Analysis of the Surface of Nonfilm-Cooled and Film-cooled Nozzle Guide Vanes in Transonic Annular Cascade,” 2017 ASME Turbo Expo, Charlotte, GT2017-64982.

• • M. Alshehaby, K. Ragab and L. El-Gabry, 2017, “Numerical Optimization of Geometry Parameters for Shaped Film Cooling Holes,” 2017 ASME Turbo Expo, Charlotte, GT2017-65063.

• • Mobarez, A., A. Elbaz, and L. El-Gabry, 2015, “Numerical Simulation of Pulsed Film Cooling on a Turbine-Blade Leading Edge Model,” 16th International Conference on Aerospace Sciences & Aviation Technology, May 26-28, Cairo, Egypt.

• • Alameldin, A. and L. El-Gabry, 2015, “Assessment of Different CFD Modeling Techniques for Film Cooling,” Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan.

• • Alshehaby, M. and L. El-Gabry, 2015, “Comparative Study between Hole Shapes for Flat Plate Film Cooling Using Numerical Model,” Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan

• • K. Ragab and L. El-Gabry, 2015, “Prediction of heat transfer distribution over the surface of a nonfilm-cooled nozzle guide vane in a transonic annular cascade,” 2015 ASME Turbo Expo, Montreal, GT2015-43221.

• • K. Shalash, L. El-Gabry, and M. Abo El-Azm, 2014, ” Investigation of a Novel Discrete Slot Film Cooling Scheme,” 2014 ASME Turbo Expo, Dusseldorf, GT2014-26019.

• • A. Alameldin, L. El-Gabry, J. Fridh, and R. Saha, 2014, “CFD Analysis of Suction and Pressure Side Film Cooling Influence on Vane Aero Performance in a Transonic Annular Cascade,” 2014 ASME Turbo Expo, Dusseldorf, GT2014-26617.

• • K. Shalash., L. El-Gabry, and M. Abo El-Azm, 2013, “Numerical modeling of slot film cooling using a wall function,” 2013 ASME Turbo Expo, San Antonio, GT2013-94127.

• • A. Alameldin, L. El-Gabry, 2013, “CFD analysis of secondary flow losses in an annular sector cascade,” Proc. 11th International Congress of Fluid Dynamics & Propulsion, Alexandria, Paper ICFD-11-EG-4059

• • K. Shalash., L. El-Gabry, and M. Abo El-Azm, 2013, “Assessment of RANS CFD simulation coupled with a wall function for gas turbine film cooling,” Proc. 11th International Congress of Fluid Dynamics & Propulsion, Alexandria, Paper ICFD-11-EG-4094

• • L. El-Gabry, R. Saha, J. Fridh, and T. Fransson, 2012, “Measurements of hub flow interaction on film cooled nozzle guide vane in transonic annular cascade,” 2012 ASME Turbo Expo, Copenhagen, Paper GT2012-68088.

• • W. Siddique, L. El-Gabry, and T. Fransson, 2012, “Design Optimization of Internally Cooled Trailing Edge at Engine Similar Conditions- A Conjugate Heat Transfer Problem,” 2012 ASME Turbo Expo, Copenhagen, Paper GT2012-68303.

• • A. Basha, H. Dolfe, M. Åslin, and L. El-Gabry, 2011, “Membrane distillation test for concentration of RO brine at WESSCO, Jeddah,” IDAWC/PER11-351.

• • L. El-Gabry, D. Thurman, P. Poinsatte, and J. Heidmann, 2011, “Turbulence and heat transfer measurements in an inclined large scale film cooling array – part I, velocity and turbulence measurements,” 2011 ASME Turbo Expo, Vancouver, Paper GT2011-46491

• • D. Thurman, L. El-Gabry, P. Poinsatte, and J. Heidmann, 2011, “Turbulence and heat transfer measurements in an inclined large scale film cooling array – part II, temperature and heat transfer measurements,” 2011 ASME Turbo Expo, Vancouver, Paper GT2011-46498.

• • W. Siddique, L. El-Gabry, I. Shevchuk, and T. Fransson, 2011, “Flow Structure, Validation and analysis of numerical results for a two-pass trapezoidal channel with different cooling configurations of trailing edge,” 2011 ASME Turbo Expo, Vancouver, Paper GT2011-46266.

• • L. El-Gabry, A. Sherif, and A. El-Zafarany, 2011, “Conceptual design of solar house built for desert extremes,” 2011 Global Conference on Renewable Energy and Energy Efficiency for Desert Regions, Amman, GCREEDR Paper 128.

• • K. Metwally, L. El-Gabry, and A. Makhlouf, 2010, “Approach to designing a solar concentrator for small-scale remote power application,” 2010 ASME International Mechanical Engineering Congress & Expo, Vancouver, IMECE2010-38218.

• • L. El-Gabry and R. Rivir, 2010, “Effect of Pulsed Film Cooling on Leading Edge Film Effectiveness,” 2010 ASME International Mechanical Engineering Congress & Expo, Vancouver, IMECE2010-37354.

• • L. El-Gabry, 2010, “Community based learning in ENGR 101 term project: toy design for school children in disadvantaged Old Cairo community,” 2010 ASEE Conference & Expo, Louisville, Paper AC2010-68.

• • A. Ameri and L. El-Gabry, 2009, “Comparison of Steady and Unsteady RANS Heat Transfer Simulations of Hub and Endwall of a Turbine Blade Passage,” Proceedings of 2009 ASME Summer Heat Transfer Conference, San Francisco, Paper HT2009-88394.

• • L. El-Gabry and A. Ameri, 2008, “Computation of Unsteady Heat Transfer on the Casing of a Turbine Blade:  Effect of Inlet Total Temperature Wake,” Proc. 9th International Congress of Fluid Dynamics & Propulsion, Alexandria, Paper ICFDP9-EG-234.

• • A. Ameri and L. El-Gabry, 2008, “Computation of Unsteady Heat Transfer on the Casing of a Turbine Blade,” Proc. 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Paper ISROMAC12-2008-20191.

• • L. El-Gabry, 2007, “Numerical Modeling of Heat Transfer on a Gas Turbine Blade Tip: Effect of Tip Clearance and Tip Geometry,” Proc. 2007 ASME Turbo Expo, Montreal, Paper GT2007-27008.

• • A. Tolpadi, J. Tallman and L. El-Gabry, 2005, “Turbine Airfoil Heat Transfer Predictions Using CFD,” Proc. 2005 ASME Turbo Expo, Reno, Paper GT2005-68051, 2005.

• • J. Tallman, A. Tolpadi and L. El-Gabry, 2004, “Gas Turbine External Heat Transfer Predictions using CFD,” AIAA/ASME Northeast Aerospace/Mechanical Engineering Symposium. Alban

• • L. A. El-Gabry and D. Kaminski, 2001, “Experimental Investigation of Local Heat Transfer Distribution on Smooth and Roughened Surfaces under an Array of Angled Impinging Jets,” Proc. 2001 ASME International Mechanical Engineering Congress and Exposition, New York, Paper 2-14-1-1.

NASA AND GOVERNMENT REPORTS

• Material and Flow Characterization of Pinniped Vibrissae, 2015, L. El-Gabry, D. Thurman, P. Poinsatte, V. Shyam, NASA- OAI (Ohio Aerospace Institute) Report, 2015

• Procedure for determining length scales using hotwire anemometry, 2011, L. El-Gabry, D. Thurman, P. Poinsatte, NASA/TM NF1676B TN4063

• Advanced turbulence measurements and comparison with CFD, Lamyaa El-Gabry, NASA-OAI (Ohio Aerospace Institute) Report, 2011

• Turbulence and heat transfer measurements in an inclined large-scale film cooling array, Lamyaa El-Gabry, NASA-OAI (Ohio Aerospace Institute) Report, 2010

• Effect of pulsed film cooling on leading edge effectiveness, Lamyaa El-Gabry, U.S. Air Force-ASEE (American Society of Engineering Educators) Report, 2009

• L. El-Gabry, J. Heidmann, and A. Ameri, 2009, “Numerical Analysis of Film Cooling at High Blowing Ratio,”

• Numerical analysis of film cooling at high blowing ratio, Lamyaa El-Gabry, NASA-OAI (Ohio Aerospace Institute) Report, 2008

• Part I – Analysis of a gas turbine shroud:  Effect of unsteadiness due to wake passing, Part II – CFD modeling of film effectiveness, Lamyaa El-Gabry, NASA-OAI (Ohio Aerospace Institute) Report, 2007

INVITED SEMINARS AND TALKS

• “CFD & Turbulence Modeling,” Seminar, Solar Turbines Incorporated, San Diego, California, U.S.A August 2, 2017.

• “Vane Film Cooling,” Seminar, Solar Turbines Incorporated, San Diego, California, U.S.A July 12, 2017.

• “Fundamentals of Film Cooling,” Seminar, Solar Turbines Incorporated, San Diego, California, U.S.A June 21, 2017.

• “Towards More Sustainable Water and Energy Agendas for Africa”, Panelist, 2nd International Conference on Solar Energy Solutions for Electricity and Water Supply in Rural Areas, Cairo, Egypt October 2016.

• “Introduction to Gas Turbine Internal Cooling,” Paper GT2016-56048, 2016 ASME Turbo Expo, Seoul, Korea, June 2016.

• “Careers in Turbomachinery” Panelist, ASME student advisory committee panel session, 2016 ASME Turbo Expo, Seoul, Korea, June 2016.

•  “Active learning strategies in introductory engineering and mechanical engineering courses,” AUC School of Sciences & Engineering Teaching and Learning Forum, New Cairo, Egypt, September 30, 2014.

• “Community-Based Learning and Civic Engagement as New Modes of Outreach,” AUC Science Outreach and Communication Workshop, Cairo, January 14, 2012.

• “Solar Decathlon Europe 2012 and designing for sustainability,” Escuela Técnica Superior de Arquitectura de Madrid, Universidad Politécnica de Madrid, Oct 6, 2011.

• “Turbulence characterization for detached film coolant jet,” NASA Glenn Research Center, Cleveland, Ohio, August 18, 2011.

• “Turbulence measurements in an inclined large scale film cooling array and comparison with CFD,” Poster session, NASA Glenn Research Center, Cleveland, Ohio, August 10, 2011.

• “University Programs Graduate Study Forum,” NASA Glenn Research Center, Cleveland, OH, July 2011.

• “Community based learning in Engineering,” AUC Intensive English Program guest lecture, March 2011.

• “Turbulence modeling,” KTH Royal Institute of Technology, Stockholm, Sweden, January 2011.
• “Challenges in turbine heat transfer,” LTH Lund Institute of Technology, Lund, Sweden, December 2010.

• “Three-part seminar on film cooling,” Siemens Industrial Turbomachinery AB, Finspång, Sweden, November 2010

• “Research topics in gas turbine heat transfer,” KTH Royal Institute of Technology, Stockholm, Sweden, September 2010

• “Turbulence and heat transfer measurements in a jet-in-cross flow for film cooling applications,” NASA Glenn Research Center, Cleveland, Ohio, August 2010.

• “Community based learning in ENGR 101,” Community Based Learning Symposium The American University in Cairo, September 2009.

• “A trip down memory lane:  selected topics in heat transfer research,” Graduate seminar, The American University in Cairo, April 30, 2009

• “Pulsating film cooling: an experimental investigation,” Graduate seminar, The American University in Cairo, October 22, 2009

• “Numerical analysis of film cooling at high blowing ratio” sponsored by the Research & Technology Directorate, NASA Glenn Research Center, Cleveland, Ohio, July 15, 2008.

• “CFD Modeling of Film Cooling and Comparisons with Experimental Data,” Graduate seminar, The American University in Cairo, November 2008.

• “Gas turbine blade heat transfer,” Graduate seminar, The American University in Cairo, November 6, 2007.

• “Graduate studies for women engineers,” Panelist, Rensselaer Polytechnic Institute, 2005.